Many consumers have recently expressed their dissatisfaction with the Linksys Velop red light issue. Are you having trouble with your Linksys Velop router as well? If you answered yes, then have a look at the troubleshooting tips in this article. And we are going to resolve the Linksys velop red light issue in this article. Let’s start
Let’s First Understand Why Linksys Velop Shows Red Light?
The red light issues hamper your WiFi experience in certain cases. Have a tab on the steps below to know about such cases.
You can check with your ISP:
The problem may be from the end of your Internet Service Provider. Simply check with your ISP to know whether you are receiving sufficient internet services from the end of your service provider or not. But, before playing the blame game with ISP, make sure you have already paid your bills for the WiFi data package. If not, your Linksys Velop will certainly show the red light issue.
On the other hand, if all bills are cleared and your ISP also denies having any fault from his end, then you might have not followed the Linksys Velop installation steps in the right manner. Well, here’s how you can fix red light issues with your Linksys Velop Mesh WiFi Extender.
– Reboot your Linksys Velop router
Technical glitches are one of the major reasons why you are facing the Linksys Velop red light issue. To get rid of these glitches, you need to reboot your Linksys Velop router. Wondering how to do that? Well, simply walk through the steps below:
- Turn off your Linksys Velop router.
- Unplug your Velop router from the wall socket it is currently plugged into.
- Wait for a couple of seconds.
- Plug your Velop router back into its wall socket and turn it on.
Once you are done rebooting your Linksys Velop router, check whether the red light issue persists. If it does, take the help of the next troubleshooting hack.
– Make Sure that the Ethernet Connection is working:
Almost certainly, the Ethernet cable connecting your wireless devices is either worn out or broken. It appears that you did not pay attention to the cord during the Linksys WiFi setup.
But don’t panic; we can assist you in correcting your error. You’ll need to acquire a new Ethernet wire to replace the one you’re presently using. If doing so does not work for you, it is advised that you connect your devices using a wireless source.
– Avoid using the Wifi:
If you have placed your Linksys Velop router anywhere near transmitting appliances, metal objects, electronic devices, or reflexive surfaces, change its location.
While doing so, make sure that it is not being placed near the following things:
- Washing machines
- Baby monitors
- Bluetooth speakers
- Fish tanks
- Microwave ovens
- Aluminum studs
- Concrete walls
Apart from this, do not place your wireless device near utensils containing water.
– Update the Firmware
Another reason forcing you to experience the Linksys Velop red light issue is an outdated firmware. There is a possibility that you ignored the pending update message. You shouldn’t have done that.
But, fret not. You still have time. Thus, follow the step-by-step instructions mentioned below and get to know how to update the firmware of your Linksys Velop router to the latest version:
- Switch on your computer or laptop.
- Open an internet browser as per your choice.
- In the address bar of the internet browser, type linksyssmartwifi.com.
- Press the Enter key.
- The Linksys Velop login page will come into view.
- Enter the default username and password.
- Click the login button.
- Once you have logged in, click the Router Settings menu.
- Click the Connectivity option.
- Select the Check for Updates button.
- If a new firmware update is available, click the Update button.
In some time, the firmware of your Linksys Velop router will get updated to the latest version. If you are not comfortable updating your wireless device manually, it is recommended that you use the app for the same process.
– Reset Your Linksys Velop Router
Are you still facing the red light issue with your Linksys Velop router? Well, that is unfortunate. But, we still have one more troubleshooting hack left for you to implement. And that is, performing Linksys Velop reset.
Here is how you can restore your Linksys Velop router to the default factory mode:
- Look for the Reset button on your Linksys Velop router.
- Take an oil pin and press the Reset button with its help.
- Wait for approximately 2 minutes.
Once you are done resetting your Linksys Velop router, reconfigure it and make sure that the Linksys Velop node is in place.
With that, our guide to troubleshooting the Linksys Velop red light issue has come to an end here. We hope that after following the troubleshooting hacks mentioned above, you will easily be able to get rid of the red light issue.
If you are aware of any other way through which this issue can be resolved, do share it with your fellow readers via the comment section. Surely, they would love to learn about something new.
Information related to the topic How you Can Resolve your Linksys Velop Red Light Issue
Here are the search results of the thread How you Can Resolve your Linksys Velop Red Light Issue. You can read more if you want.
You have just come across an article on the topic How you Can Resolve your Linksys Velop Red Light Issue. If you found this article useful, please share it. Thank you very much.